How to Maximize Your Savings During the Big Clear-Out

Ready to upgrade your home with pipe furniture without blowing the budget. The Big Clear-Out is your best time to stock up on the parts and kits you need for DIY pipe furniture that looks custom and lasts. 

Use this quick plan to stack categories, build a smarter cart, and lock in the biggest savings before popular sizes disappear.

1: Stack the right categories

Pipes

Build your frame first. Choose one pipe size per project so parts mix cleanly.

• ½ in. for a lighter profile on shelves, small carts, and lamp arms

• ¾ in. for bold lines on desks, benches, and utility racks

Fittings

These are your corners, mounts, and finishes. They also vanish first during a clear-out.

• Floor flanges for mounting to walls, floors, and tops

• 90° elbows and tees for frames and stretchers

• Caps and couplings for clean ends and quick extensions

DIY Kits

Kits shortcut the guesswork. You still build it yourself, but the parts are pre-matched.

• Shelf kits for fast wall storage

• Desk and table leg kits for rock-solid worktops

• Cart and lighting kits for high impact with simple assembly

Cart-building hacks that save real money

1. Pick one pipe size per build so every fitting plays nicely together.

2. Match finishes for a clean look and easy interchangeability.

3. Buy in pairs and fours for legs, corners, and brackets.

4. Round up to the next tier with low-cost fillers like caps, close nipples, and couplings.

5. Measure once, buy once. Sketch the build and count every corner and mounting point.

6. Add surfaces last. Secure the savings on pipes and fittings, then choose wood tops and shelves to match.

Under $25 Essentials: Small Parts, Big Impact

Stretch your budget with the fittings you use in every DIY pipe furniture build. These pieces help you finish corners, clean up ends, and fine-tune spacing without breaking the bank.

90° Elbows

Turn corners on shelves, carts, tables, and lamp arms. Keep a set in ½ in. for lighter profiles and ¾ in. for bold frames. Typical use: 4–8 per project.

Square Flanges

Mount to walls, floors, or tops for a clean, modern footprint. Square profiles help keep lines straight and level, which is perfect for shelves, hook rails, and desk legs. 

Caps

Finish open ends for a clean, safe look. Perfect for hook rails, ladder rungs, and shelf guards. Low-cost way to round up your cart.

Project ideas that love Big Clear-Out pricing

Rolling bar or pantry cart
Uprights, elbows, and caps for corners. Flanges become caster plates. Two boards finish the shelves.

Open kitchen shelves
Flanges and elbows create rigid brackets. Live-edge or straight boards soften the steel.

Entry bench and coat rail
Bench on pipe legs with baskets below. A slim rail above for grab-and-go hooks.

Home office desk and wall ledge
Table leg kit for the top. Matching bracket shelf for books, plants, and a task lamp.

All four builds use overlapping parts, which makes it easier to hit the spend tiers while keeping your look cohesive.

Your game plan

1. Pick two or three projects you will finish this month.

2. Build your cart from Pipes, Fittings, and DIY Kits.

3. Shop the Big Clear-Out Sale and get up to 60% Off selected pipes and fittings.

4. Check out before sizes vanish.

Shop the Big Clear-Out → Up to 60% Off selected Pipes and Fittings.

Early shoppers get the best selection. Build your cart today, then build the room you want tomorrow.