How to Build Your Own Pipe Table Lamp: A Fun DIY Guide

Get ready to add some industrial flair to your space! Whether you’re looking to brighten up your desk, nightstand, or favorite reading nook, this pipe table lamp is the perfect way to combine function with style. With its dimmable feature and vintage appeal, this lamp brings warmth and a cozy vibe wherever you place it. Follow this fun, step-by-step guide to build your very own pipe table lamp!

What You’ll Need:

This kit comes with everything required to assemble your lamp. Here’s a quick rundown of the parts you’ll use:

Step-by-Step Assembly Instructions

Follow these steps, and before you know it, your brand-new Reader Table Lamp will be illuminating your space. Let’s get started!

Step 1: Assemble the Base

Begin by attaching the big flange (C) to the bushing (B). This will serve as the base of your lamp, ensuring it stays sturdy on your table or desk.

Now, screw the 1.5” pipe (D) into the top of the bushing, and attach the tee fitting (E) to the other end of the pipe. This structure forms the base and spine of your lamp.

Tip: Start threading the electrical wire through the flange and bushing at this step to save time later. It’s easier to feed the wire now than after assembly.

Step 2: Build the Neck

Next, attach the 12” pipe (F) to the open end of the tee. This will extend the structure vertically and create the neck of your lamp.

At the top of the 12” pipe, screw on one of the 90° elbows (G). This is where things start to take shape. The elbow will give your lamp that sleek, industrial curve.

Step 3: Add the Arm and Top Elbow

Now, take the 2.5” pipe (H) and connect it to the 90° elbow you just installed. On the other side of the 2.5” pipe, attach the second 90° elbow (G). Make sure both elbows are aligned properly to create a smooth curve.

Step 4: Finish the Socket Base and Wire Management

Connect the second bushing (I) to the open end of the top elbow. Here’s where things get a bit technical—thread the remaining wire through all the pipes and fittings, making sure there’s 1-2 inches of slack coming out at the socket base.

Pro Tip: If the wire seems stuck while threading, unscrew a few elbows to adjust the alignment. Sometimes, wires can get caught inside the fittings.

Step 5: Connect the Electrical Socket

Carefully push the wire into the small rectangular holes at the base of the electrical socket. Give the wire a gentle tug to ensure it’s secure and won’t come loose.

Don’t attach the socket to the lamp just yet—first, you need to test it!

Step 6: Test Your Lamp

Before fully assembling, slide the cardboard sleeve and socket cover over the electrical socket. Screw in your favorite light bulb (we recommend an Edison bulb for a vintage look).

Now it’s time to plug in the lamp and flip the switch! Check to make sure everything works properly. If the lamp lights up, you’re almost done!

Step 7: Lock It in Place and Enjoy

Once the lamp is working, press the socket firmly into the base until you hear a satisfying click. And just like that, your Reader Table Lamp is complete!

Setting the Mood with Your New Lamp

The best part? This stylish table lamp comes with a dimmable feature, allowing you to create the perfect ambiance for any room. Whether you need bright light for reading or soft, ambient lighting for a relaxing evening, your new Reader Table Lamp is ready to shine.

Final Thoughts and Styling Tips

Congratulations! You’ve just built your very own industrial-style Reader Table Lamp. It’s more than just a lamp—it’s a conversation piece that blends function with rugged charm.

Here are a few ideas for styling your new lamp:

Desk Buddy: 

Place it on your work desk for late-night study sessions or creative work.

Cozy Corner: 

Pair it with a comfy chair and a stack of books for a charming reading nook.

Nightstand Accent: 

Add it to your bedroom for soft, warm lighting to wind down your evenings.

Bonus Tip: Experiment with Different Bulbs

Try switching up your light bulbs for different moods—go with a filament bulb for a warm, vintage glow or a cool LED bulb for a more modern vibe.

With your new Reader Table Lamp assembled, you’ve added both light and personality to your space. Happy building, and enjoy the warm glow of your new favorite DIY project!

Feeling inspired? Explore more at pipe-decor.com and discover how easy it is to build stylish, industrial accents that reflect your personal taste. With PIPE DECOR®, your next favorite project is just a pipe fitting away!